Process and conveyor belting
Technical belt data sheet
Flexam EX 10/2 0+01 black AS FR IR
Article code 589501
General information
Product group Synthetic belts
Market segment General handling, Airports
Main features Antistatic, Flame retardant, Impact resistant, Low noise
Belt support Slider bed, Rollers, Flat
Belt construction
Fabric tension layer polyester stable 2-ply
Topside Flexam PVC impregnation black
Bottomside fabric low noise natural
Characteristics
Foodgrade (FG) no
Antistatic (AS) yes, in accordance with ISO 21178
High conductive (HC) no
Flame retardant (FR) yes, in accordance with ISO 340:2013
ATEX approval no
Technical belt data
Force at 1% elongationaccording to ISO 2118110.0 N/mm 56.00 lb./in.
Belt thicknessinternal AB method KV.0023.60 mm 0.142 in.
Weightinternal AB method KV.0044.00 kg/m² 0.819 lbs./ft.²
Temperature -15 to 80 °C 5 to 176 °F
Temperature short -15 to 100 °C 5 to 212 °F
Min. pulley diameter flexing 80.0 mm 3.150 in.
Min. pulley diameter back flexing 120.0 mm 4.724 in.
Standard belt width 3000 mm 118.11 in.
Maximum belt width 3000 mm 118.11 in.
Endless instructions
Hot splicing is always preferable. Cold splicing can only be done when the belt is exposed to normal temperatures and the humidity is not
excessive. For the working method, consult the splice information and the equipment literature. Apply the recommended splice as indicated in the
separate information.
Additional information
The information applies at approx. 20°C (68°F). Keep the belt tension to a minimum for maximum belt and conveyor life. Stated is the belt
temperature. The allowable product temperature may vary.
The diameters are valid for a hot spliced belt and at the indicated belt force. Depending on the splice and working conditions (e.g.
temperature), different pulley diameters may be possible or necessary. When fasteners are used the minimum diameters are increased
by approx. 50%.
Consult our specialists for available profiles and accessories.
Printed: July 16, 2015
Edited: May 28, 2015
Because of continuous development, the presented data is subject to alteration. This data replaces that included in previous publications. Ammeraal Beltech excludes any
liability for the incorrect use of the above stated information. Subject to the general terms and conditions of sale and delivery, as applied by its operating companies, are all
activities performed and services rendered by Ammeraal Beltech.
© Ammeraal Beltech
